Well, I took the sucker apart. Its not that complicated. I found out that the problem was one of the thingys that turn the fuel injector assembly inside of the fuel rail.
I am not sure that I am calling these parts bytheir proper names, but anywho. I will post somepics as soon as I figure out how.
I turns out that he gear teeth were missing on one side of the piece and the broken off bits were clogging the gears of the other injectors. I ended up rotating the broken piece 180 degreesand putting it back in.
I got her back together and after cranking for about 45 seconds, she started sputtering. Then she fired up. I may need to make a few adjustments because I am getting full rpm's but not full power.