Soundguy
Old Timer
- Joined
- Mar 11, 2002
- Messages
- 51,575
- Location
- Central florida
- Tractor
- RK 55HC,ym1700, NH7610S, Ford 8N, 2N, NAA, 660, 850 x2, 541, 950, 941D, 951, 2000, 3000, 4000, 4600, 5000, 740, IH 'C' 'H', CUB, John Deere 'B', allis 'G', case VAC
cast is soft.. 
if i was blowing them regular.. and in dire straights.. I might use some indian head gasket maker/sealer on it and glue the gasket on.. and apply to the other side and bolt up.. and that would likely be a long term fix.. but.. would be a MAJOR PITA for the next time you did fix it.. getting that stuff off.
if i was blowing them regular.. and in dire straights.. I might use some indian head gasket maker/sealer on it and glue the gasket on.. and apply to the other side and bolt up.. and that would likely be a long term fix.. but..
would be a MAJOR PITA for the next time you did fix it.. getting that stuff off. 