Tiller no luck with iseki tiller any suggestions?

   / no luck with iseki tiller any suggestions? #1  

agcomike

Silver Member
Joined
Apr 28, 2003
Messages
112
Location
southern states
Tractor
Hinomoto e2004 aka 5020
I have a iseki tiller 4.5' and here i have hard clay it's been realy wet but when i've tilled it's been dry..

But i have 2-3" clod's every where any suggestions on using the tiller to fix this? the tiller has the straight tines ... do i just need to buy a L-C shapped tine tiller?


I subsoiled it then tilled it 3 times.. let dry out then sub soiled it agian then tilled it 3 times and then let it dry and now it's a cloddy mess..
 
   / no luck with iseki tiller any suggestions? #2  
It sounds like you need new tines. Your tines should be "L" shaped. As tines wear out the bottom of the "L" wears off and you are left with a straight tine.
 
   / no luck with iseki tiller any suggestions? #3  
No experience w/ straight tines.. but w/ L tines.. if you are getting clumps.. the size of baseballs.. it usually means the soil is still too wet to till. Can the straight tines be replaced w/ L tines on that brand tiller.. less $ than buying a new one.
 
   / no luck with iseki tiller any suggestions?
  • Thread Starter
#4  
Where can i find new tines at? I have the iseki model # would it cross with a ford/new holland or are tiller tines universal?
 
 

Tractor & Equipment Auctions

2023 LANDHONOR VPC-11-72W VIBRATORY PLATE COMPACTO (A51244)
2023 LANDHONOR...
2019 CATERPILLAR D6T LGP HI-TRACK CRAWLER DOZER (A51242)
2019 CATERPILLAR...
UNUSED MOWERKING QUICK ATTACH ANGLE BROOM (A51244)
UNUSED MOWERKING...
Ford F550 Dump Truck (A47384)
Ford F550 Dump...
(2) METAL SPOOLS W/ SOME DURALINE 4" PVC PIPE (A51244)
(2) METAL SPOOLS...
2016 Komatsu PC1250LC-8 Hydraulic Excavator (A50322)
2016 Komatsu...
 
Top