I have a MF 1759 that I cannot get to show MPH on the display. I have removed the 5amp fuse, then turned the switch on. I then scroll down to "units" and long press it til it beeps and"mph" shows up. Then I long press it again til it beeps and it says "set". I turn the switch back off and reinstall the fuse. I turn the swit h back on and the display still says "off" as it always has. What am I doing wrong??? Thanks for the help!!!
No MPH Display
- Thread starter jonespwil
- Start date
- Views: 1110
lpakiz
Gold Member
- Joined
- Jul 25, 2017
- Messages
- 430
- Location
- Greenwood, WI
- Tractor
- MF1754 HST, Cab, 6 foot Front Mount Snowblower
On my 1754, there are 2 buttons on the dash, ahead of my left knee. One of them supposedly initiates a "regen" as indicated by the graphic on the button.
The other button toggles between 3 screens: MPH, SOOT and OFF. If yours has this setup, try that button. (I " think" the button nearest your knee is the one)
If that doesn't do anything, message back here and I'll take a pic or video and could send it to your email.
The other button toggles between 3 screens: MPH, SOOT and OFF. If yours has this setup, try that button. (I " think" the button nearest your knee is the one)
If that doesn't do anything, message back here and I'll take a pic or video and could send it to your email.
ronT
Silver Member
Is that a Power Shuttle Shift or HST? I have the same problem with a 1755m and dealer was going to replace the display screen but AGCO told them it's "normal" on a Power Shuttle. No MPH display.
Torvy
Super Member
I don't remember grandpa's Allis having a speedometer, but he managed to farm his whole life without one.
I don't even have a tach on my 2310 v. 1.0. And, it's very happy.
I'm happy, to not have the tach cable freezing in the winter either.
