NX Loader able to curl and lift at the same time?

[waendo]

Test drove an NX4510 last night. There was a loader diagram, pic attached. The loader would not lift/drop and curl at the same time. From reading other posts and looking at the diagram, I believe that should be possible. Is it possible that the loader was installed incorrectly?

Thanks.

 

[AWSubie]

At max rpm it will but not at full input on both controls. It takes some finesse to get both actions.

 

[waendo]

This is the diagram.

 

[waendo]

At max rpm it will but not at full input on both controls. It takes some finesse to get both actions.

Do other brands do this more easily?

 

[countrybumpkin]

Mine was tough at first to get it to do both, but as the cables relaxed the more I used the loader it has gotten much smoother and easier to do.

Not sure how many hours you have on the machine, I only have a little over 700.

 

[justman777]

Haven't really tried to do so purposely on mine, but I can try it when I get back to the house. Out of town for the next week or so. Sorry!

 

[waendo]

It's a 2018 built NX4510 with 26hours.

 

[AWSubie]

Construction type machines do but they have (in general) a lot more hydraulic flow. Ag tractors are intended to do a myriad of different chores with acceptable performance at a moderate price point.

 

[waendo]

I really like the value of the NX, but wondering if I will be frustrated by the slow FEL, I have a lot of dirt work to get completed.

 

[MinnesotaEric]

The loader valve is not piloted, so one function at a time unless really feathered.