Does anyone know of any First Choice dealers in NY State? Would appreciate phone numbers, names, and addresses if available. I E-mailed First Choice several months ago in regard to this info and also requested brochures, catalogs, or literature on their products, but received no reply or literature. This lack of response on their part has me even wondering if I should even be inquiring about their products, and also that it might just be a warning sign.
NY First Choice Dealers?
- Thread starter woodyed
- Start date
- Views: 1521
JohnMiller3
Elite Member
- Joined
- Jan 15, 2001
- Messages
- 2,517
- Location
- Capital District, Upstate New York
- Tractor
- Satoh S650G, MF135, MF165, JD5205
<font color=blue>...I E-mailed First Choice several months ago ... but received no reply or literature. This lack of response on their part has me even wondering ...</font color=blue>
From what I've seen... the company is brand new... and appears to bend over backwards for potential customers...
Perhaps, a glitch happened a few months back... I'd try again... they really seem to be very accommodating... you may also try an 800 number and talk direct... (do a search on TBN for it?)
A new dealer for them is located in Sharon Springs, NY - MacFadden's Equipment...
Good luck.
From what I've seen... the company is brand new... and appears to bend over backwards for potential customers...
Perhaps, a glitch happened a few months back... I'd try again... they really seem to be very accommodating... you may also try an 800 number and talk direct... (do a search on TBN for it?)
A new dealer for them is located in Sharon Springs, NY - MacFadden's Equipment...
Good luck.
Inspector507
Super Member
First Choice
1-888-945-3102
Jerry
1-888-945-3102
Jerry
JohnS
Platinum Member
Woodyed,
If you call, please post back here. I would be interested in that list, too. Would like to see their rear blade and possibly RFM, in person.
If you call, please post back here. I would be interested in that list, too. Would like to see their rear blade and possibly RFM, in person.
Fly_Rodr
Silver Member
I'm not sure if the email "bsi.pieter@simflex.com" works. I also sent an email about a month ago, no response. Will wait till next spring begin search for box blade again.
DAP
Veteran Member
- Joined
- Nov 28, 2001
- Messages
- 1,180
- Tractor
- JD LX288 and a B7800
Does anyone know if they sell rotary cutters?
Kodiak
Platinum Member
- Joined
- Apr 25, 2002
- Messages
- 859
- Location
- Monroe,Washington
- Tractor
- New holland TC29-9x3 Woods 1012 FEL, Woods, 7500 Backhoe / Kubota L345DT 4WD, Kub FEL, Kub Backhoe
Yes they just introduced a new line of rotary cutters in July.
JohnS,
Called them today and was informed that they have no literature or cataloges as of this date. The person I spoke to also stated that if they did, that the prices for their implements would be higher. The only info and specs for their products are contained on their website, which is greatly lacking, especially in the spec department, in my opinion. I also found out that the nearest dealer to me is about 90 miles away. I've suddenly lost much interest in their products.
Called them today and was informed that they have no literature or cataloges as of this date. The person I spoke to also stated that if they did, that the prices for their implements would be higher. The only info and specs for their products are contained on their website, which is greatly lacking, especially in the spec department, in my opinion. I also found out that the nearest dealer to me is about 90 miles away. I've suddenly lost much interest in their products.
tractorman
Silver Member
My first order as a dealer for First Choice should be coming in tomorrow. I will post again after I get a chance to look everything over.
