Oil fill cap behind injector pump (BX2660)

   / Oil fill cap behind injector pump (BX2660) #1  

nepa

Silver Member
Joined
May 31, 2013
Messages
125
Location
Forest City, PA
Tractor
Mitsubishi 180D, Jinma 284 sold, Kubota BX2660, IH Cub, Case 580CK, Minneapolis Moline 4 Star (sold), TYM 574, Furukawa FX-040
There is a large cap behind the injector pump marked "oil". I can not find any reference to this cap in the owners manual. Is this a second way to put oil in the crankcase (As opposed to the cap on the valve cover)? Does the injector pump get oil from the engine?
 
   / Oil fill cap behind injector pump (BX2660) #2  
On my tractor is is where you are supposed to put the oil, not the valve cover. There is a plug on the valve cover, but it does not look easily removed nor is it supposed to be.
 
   / Oil fill cap behind injector pump (BX2660) #3  
My L2800 has two oil fills, one on the side, I believe where yours is, that can be a pain with the loader attached and one on the valve cover.
 
   / Oil fill cap behind injector pump (BX2660) #4  
I've always added oil through the valve over on my BX
 
   / Oil fill cap behind injector pump (BX2660) #5  
I had a B2620 and the oil was added through the valve cover opening.
 

Tractor & Equipment Auctions

Unused GIYI Thumb Clamp Attachment, (A35431)
Unused GIYI Thumb...
12ft Kello Built Disc (A35780)
12ft Kello Built...
Unused Swict 78in Loader Bucket, (A35431)
Unused Swict 78in...
Unused Greatbeat 20ft Bi-Parting Iron Gate w/Deer (A35431)
Unused Greatbeat...
Big Tex 14LX Tandem Axle Dump Trailer (A36485)
Big Tex 14LX...
2024 40ft High Cube Container, (A35430)
2024 40ft High...
 
Top