OP
BobRip
Elite Member
This might answer some questions about indication of too much tilt. This might help.
Oil Pressure Switch On PT422
- Thread starter BobRip
- Start date
- Views: 1705
JackRobin
Bronze Member
Hello Gentleman,
This switch should be hooked up to the external LED light that should be mounted in the area of steering wheel, so that you know that engine has a low oil pressure. I'm not sure if PT is using this feature. IT IS NOT A LOW OIL SENSOR AND IT WILL NOT TURN OFF YOUR ENGINE!
Regards,
Jack Gawecki
Robin America, Inc.
Technical Support Dept.
800-277-6246
This switch should be hooked up to the external LED light that should be mounted in the area of steering wheel, so that you know that engine has a low oil pressure. I'm not sure if PT is using this feature. IT IS NOT A LOW OIL SENSOR AND IT WILL NOT TURN OFF YOUR ENGINE!
Regards,
Jack Gawecki
Robin America, Inc.
Technical Support Dept.
800-277-6246
OP
BobRip
Elite Member
They did not use it on my 422 built about 4 years ago. The switch is there, but nothing is connected to the wire coming out of the end of the switch.
Bob Rip
Bob Rip
