Oil & Fuel oil reccomendation

[BertS]

no, this is my first tractor.......lol

however it has been my experience over the years, regardless of the project, that they never run this smoothly....ie needing to punch a hole in the oil filter with a screw driver in order to get it off, losing the plug to the oil pan, got the wrong filter........something......just kind of skeery, when it all goes as planned, and I'm the one that did the work...... lol

 

[SailorBob]

no, this is my first tractor.......lol

however it has been my experience over the years, regardless of the project, that they never run this smoothly....ie needing to punch a hole in the oil filter with a screw driver in order to get it off, losing the plug to the oil pan, got the wrong filter........something......just kind of skeery, when it all goes as planned, and I'm the one that did the work...... lol

I can understand that. I recently had the misfortune to have to rebuild the engine on my YM1700 (long story). That is the first time I have ever tried to rebuild anything like that. Anyway, when I got everything back togother and turned the key it fired right up first time. I was really surprised and pleased. I expected to have some kind of fight with it to get it running.

There are some good folks who hang out on the board here with good advice for novices.

 

[AMP762]

dang!!!

changing the oil was too easy.....lol.....filter came off too easy, oil was able to be drained too easy, and fill up, well fill up is always the easiest part.

now I'm worried something bad is going to happen, since the oil change went so smoothly.....

You're rite something is wrong,drain it out and do it again.