OK, a dumb question to some, but...
- Thread starter bxowner
- Start date
- Views: 3326
yankeerider
Platinum Member
I have a DR 3-pt chipper (ground discharge) which I use on my JD 755 (15 PTO hp) and am quite satisfied with it.
froggy
Veteran Member
- Joined
- Jul 14, 2001
- Messages
- 1,075
- Location
- Cooke County, Texas
- Tractor
- JD4320 with TNT, electric diverter, cruise control and air suspension seat.
PaulChristenson said:
Thanks for the site.
RalphVa
Super Member
- Joined
- Dec 19, 2003
- Messages
- 7,884
- Location
- Charlottesville, VA, USA
- Tractor
- JD 2025R, previously Gravely 5650 & JD 4010 & JD 1025R
I think your tractor would probably handle a chipper that does up to 6" stuff.
Someone posted that the hp goes up by the square root of the log diameter. I chip up to 3 1/2" logs in my little MacKissic chipper and have NEVER EVER bogged it running off my 18.5 hp JD 4010, hydro.
It would certainly handle the 4 to 4 1/2" logs that a DR Chipper (made by MacKissic; some have said) does.
Ralph
Someone posted that the hp goes up by the square root of the log diameter. I chip up to 3 1/2" logs in my little MacKissic chipper and have NEVER EVER bogged it running off my 18.5 hp JD 4010, hydro.
It would certainly handle the 4 to 4 1/2" logs that a DR Chipper (made by MacKissic; some have said) does.
Ralph