Old Ford Tractors Engine Interchangeability

[Kirk-NJ]

Thanks for your input Chris. My thinking is it's probably going to be a pain trying to get the BP valve lined up just right to make it operational with the NAA top cover.
I'll Probably go with a stand pipe off the test port with a valve and rig up an angle iron triangle for the top link rocker down to the lower three point arms. Or TOH 8n top cover modification and add a diverter valve.
Being cooped up inside this winter I just wonder what will work and what won't. Because of no heat in the barn and cold temps I haven't done much but push snow and prep for the next snow storm . Looks like about 8" of fresh stuff and it;s still snowing.
Kirk

 

[Soundguy]

the top cover mod is really, really simple... 2 tapped holes and a plug.. only one needs to be drilled even.