One spare part after re-assemble. Help identify on John Deere 420

   / One spare part after re-assemble. Help identify on John Deere 420 #1  

sweins

New member
Joined
Jun 13, 2019
Messages
4
Tractor
john deere 318, M665
Picked up a project last week. Lower mount for transmission that attaches to crossmember broke off the housing. Tore tractor down, got it welded up, repaired a few items and just about done reassembly. john deere 420 linkage.jpgjohn deere 420 3pt hitch.png
Hoping someone can help me out and solve this mystery.john deere 420 pto clutch weld.jpgjohn deere 420 transmission repair.jpg
 
   / One spare part after re-assemble. Help identify on John Deere 420
  • Thread Starter
#2  
To Add, i also have a john deere 318 with 3pt hitch and it does not have this bar.
 
   / One spare part after re-assemble. Help identify on John Deere 420 #4  
   / One spare part after re-assemble. Help identify on John Deere 420 #5  
Here is some info on the crossmember.


C9240977-62BD-4DD4-B05B-2CFFEA5ECBB9.png
 
   / One spare part after re-assemble. Help identify on John Deere 420 #7  
Left over parts are proof that you made it even better!

:thumbsup:
 
   / One spare part after re-assemble. Help identify on John Deere 420
  • Thread Starter
#8  
Thanks for the info guys. Will modify the crossmember. It's been a fun little project. John deere 420 PTO clutch hole.jpg
Quick little job repairing that. Turned out okjohn deere 420 pto clutch weld.jpg
Just need to get this project put back together so I can start tackling my next project.john deere 4300.jpg
Bought this project from a local church for $1000. Needs a torsional dampener and shaft between engine and transmission. Been sitting in this condition since fall at the dealership. Looks like all the pieces are there, but ya never know. Hopefully it wasn't a $1000 wasted. That's Canadian dollars. Wish me luck.
 
   / One spare part after re-assemble. Help identify on John Deere 420 #9  
Thanks for the info guys. Will modify the crossmember. It's been a fun little project. View attachment 656955
Quick little job repairing that. Turned out okView attachment 656956
Just need to get this project put back together so I can start tackling my next project.View attachment 656957
Bought this project from a local church for $1000. Needs a torsional dampener and shaft between engine and transmission. Been sitting in this condition since fall at the dealership. Looks like all the pieces are there, but ya never know. Hopefully it wasn't a $1000 wasted. That's Canadian dollars. Wish me luck.

Loader must be worth more $1,000, even Canadian $$$
 

Tractor & Equipment Auctions

2004 TRAILMOBILE 32FT DRY VAN (A43004)
2004 TRAILMOBILE...
2018 Isuzu NPR-HD 24ft Box Truck (A44571)
2018 Isuzu NPR-HD...
McCormick Tractor with Loader (A44391)
McCormick Tractor...
2017 Harley Davidson (A45336)
2017 Harley...
2019 International WorkStar 7500 Vactor 2100 Plus Combination Sewer Jetter Vacuum Truck (A44571)
2019 International...
E-Z Trail 3400 Gravity Wagon with Honda EX27 9HP Gas Engine (A46877)
E-Z Trail 3400...
 
Top