rtm038
Silver Member
Is the return line on an open-center system pressurized?
Open center hydraulics questions
- Thread starter rtm038
- Start date
- Views: 996
J_J
Super Star Member
- Joined
- Sep 6, 2003
- Messages
- 18,973
- Location
- JACKSONVILLE, FL
- Tractor
- Power-Trac 1445, KUBOTA B-9200HST
No, as long as the return flow has direct path to tank with no restrictions. A return filter could produce some pressure.
In a valve with a PB port, and it is not being used, the fluid from the work ports is mixed with main fluid and returned to tank. If you use the PB port, the main fluid flows out the PB port and to another valve. With the PB sleeve installed, the fluid from the cylinders/motors flows out the tank port, only when they are being used.
In a valve with a PB port, and it is not being used, the fluid from the work ports is mixed with main fluid and returned to tank. If you use the PB port, the main fluid flows out the PB port and to another valve. With the PB sleeve installed, the fluid from the cylinders/motors flows out the tank port, only when they are being used.