flusher
Super Member
- Joined
- Jun 4, 2005
- Messages
- 7,555
- Location
- Sacramento
- Tractor
- Getting old. Sold the ranch. Sold the tractors. Moved back to the city.
I'll be installing the toothbar for my B7510HST/LA302 FEL today. It's from Markham Welding ($173 + $50 UPS). Was delivered last Wednesday.
Don't expect any problems since you just drill two 1/2" dia holes in the sides of the bucket for the bolts. I'll use a Milwaukee bi-metal hole saw to drill the holes since the bucket side metal is pretty thin. Markham includes two 3/8" stiffener plates about 3"x3" that you can weld around the hole for reinforcement.
The toothbar slips over the digging edge of the bucket and is designed for buckets that have the digging edge welded, not bolted, to the bucket. Contact Markham if you have the bolted type.
Markham Welding
Don't expect any problems since you just drill two 1/2" dia holes in the sides of the bucket for the bolts. I'll use a Milwaukee bi-metal hole saw to drill the holes since the bucket side metal is pretty thin. Markham includes two 3/8" stiffener plates about 3"x3" that you can weld around the hole for reinforcement.
The toothbar slips over the digging edge of the bucket and is designed for buckets that have the digging edge welded, not bolted, to the bucket. Contact Markham if you have the bolted type.
Markham Welding
