Outfitting a MB unimog w/ front three point

   / Outfitting a MB unimog w/ front three point #1  

ACUF

New member
Joined
Jul 10, 2008
Messages
1
Hi everyone,

I'm a Forester in Cincinnati Ohio, and I have a Unimog that I am outfitting with a front three point system, and had questions about some of the specs. I am using a lift platform that will have quick hitch links for the lower part of the implement, and wondered what the general width should be of those pieces. I will use CAT ll implements. Any ideas? Thank you.
 
   / Outfitting a MB unimog w/ front three point #3  
Sounds like a very interesting project. We had a member (Von, not active much anymore) who posted a complete restoration of a mog a while back. I know he was also a member of a mog forum under the same name. If you can track him down, he may be able to help, or point you in the right direction.
 
   / Outfitting a MB unimog w/ front three point #4  
There's a big unimog scene in Europe. You could get Mogs with off-factory 3pt hitch, so it might be worth it to have a look around in places like Welkom bij Unimog, the dutch site to get some ideas how the factory unit looks like.
 
   / Outfitting a MB unimog w/ front three point #5  
Cool project. I've got a mog as well, but not an ag unit. For help with the 3-pt, I'd try contacting Kevin Kurkowski (http://www.uniquipag.com/). He seems to be one of the few unimog related businesses that specialize in ag usage. You can find others contacts at the link below.

Rocky Mountain Moggers - Home page

Good luck.
 

Tractor & Equipment Auctions

2004 CHEVROLET 2500 HD (A47001)
2004 CHEVROLET...
SAND SEPARATOR (A47001)
SAND SEPARATOR...
2011 Ford F-250 Pickup Truck w/ Liftgate (A44572)
2011 Ford F-250...
2017 Bobcat E32i Mini Excavator (A46683)
2017 Bobcat E32i...
2020 INTERNATIONAL MV607 (A45046)
2020 INTERNATIONAL...
2013 CB54XW DOUBLE ROLLER (A47001)
2013 CB54XW DOUBLE...
 
Top