Overheating New Holland Powerstar 4.75

[WORKINGUY4]

I have one of these as well I noticed that my belt was slipping and fan was not turning properly. The belt is junk I am ordering a Gates belt through Napa It is an 8 rib x54 1/4" belt 1 1/8" wide Industrial belt Hopefully this will solve the problem. cost of belt around $43

New Holland PowerStar T4.75 Tractor over heating and belt squalling - YouTube

 

[farnbath]

I know this is a old post but I just had the same problem and this was the fix. Never knew the condensor slid out.

 

[farnbath]

Thanks to all for the help. Based on the suggestion from eth555, I figured out that I could slide out condenser. Despite having blown it out in place, the fins were clogged. By sliding it out I was able to access the back and open it up. The tractor is back to being happy, happy, happy. Thanks again for the help and suggestions.

This fixed my 4.75 today,,,,thanks