Owner's of JD 45X & 44X Round Balers

[oldnslo]

Screen for catching pieces of O-rings?

Since not sure what the schematic or circuit looks like I am only guessing but suspect the intent of the screen is to catch debris in lines from cylinder to manifold.

Screens on valves are semi worthless unless they only flow in one direction since flow in the side of the valve screen collects debris while flow in the nose debris is flushed back into the system.

Looking at picture that check prevents(blocks) flow from side to nose based on O-ring and backup ring orientation.

 

[LHF2019]

Since not sure what the schematic or circuit looks like I am only guessing but suspect the intent of the screen is to catch debris in lines from cylinder to manifold.

Screens on valves are semi worthless unless they only flow in one direction since flow in the side of the valve screen collects debris while flow in the nose debris is flushed back into the system.

Looking at picture that check prevents(blocks) flow from side to nose based on O-ring and backup ring orientation.

 

[Jams AB]

Cool ones.

 

[Tx Jim]

I'd like to clarify that this thread should be titled 45X not 4XX. JD rd balers capable of making 6 ft diameter bales have 2 double acting tension arm cylinders not 1 single acting cylinder on tension arm. 1st two photos are 457 next 2 photos are 467

 

[LHF2019]

I'd like to clarify that this thread should be titled 45X not 4XX. JD rd balers capable of making 6 ft diameter bales have 2 double acting tension arm cylinders not 1 single acting cylinder on tension arm. 1st two photos are 457 next 2 photos are 467

Thank you Jim. I corrected it on the other forum as well. I should have known better.