Ownership likes and dislikes

   / Ownership likes and dislikes #21  
T255:

The only "issue", front end loader has no proportional control, with a bucket it is acceptable but with forks it can be a nightmare.
rear remote does acting " weird" from time to time.

anoying issues:
bucket and forks are not 100% straight anymore, and i'm not a hard user at all !! But the buket and forks are still good enough to use. Pretty sure other people would say, "they are still straight" ;-)
Engine Oil dipstick accessibility is terrible
gearbox/ hydraulic breather rubber siphon thing is sheap

For the rest so far, nice and fun little tractor
The hydraulic pump has an output of 5-gpm, at redline of the engine. The smallest loader control valves I have found are rated for 11-gpm. So, they are twice as large as the SCUTs need, but I haven't found a loader valve that is rated for 5 to 7-gpm yet. So, you have full pump flow at about a third of the loader valve movements. Couple this with the small cylinders on the FEL, and it takes a very fine hand to feather the valve. I've considered adding restriction valves in the hydraulics to the FEL to make them less responsive and slow them down.
 
   / Ownership likes and dislikes #22  
Yes, i'm looking into another control valve or adjustable flow control valves as well.
 
   / Ownership likes and dislikes #23  
The hydraulic pump has an output of 5-gpm, at redline of the engine. The smallest loader control valves I have found are rated for 11-gpm. So, they are twice as large as the SCUTs need, but I haven't found a loader valve that is rated for 5 to 7-gpm yet. So, you have full pump flow at about a third of the loader valve movements. Couple this with the small cylinders on the FEL, and it takes a very fine hand to feather the valve. I've considered adding restriction valves in the hydraulics to the FEL to make them less responsive and slow them down.
My T224 lists the "implement pump capacity" at 4.17GPM and "steering pump capacity" at 2.11GPM, yet a max total flow at 6.97. Must be that last 0.69gpm is for the 3-pt or is it Korean math.. lol

Here's the loader valve on my T224. I couldn't find anything on it w/ a search on the Google machine..

IMG_20251003_142230460.jpg
 

Tractor & Equipment Auctions

2022 Caterpillar 289D3 Compact Track Loader Skid Steer (A55973)
2022 Caterpillar...
EZ-GO Utility Cart (A55853)
EZ-GO Utility Cart...
2007 Mercedes Benz S550 (A56859)
2007 Mercedes Benz...
2015 INTERNATIONAL DURASTAR 4300 (A58214)
2015 INTERNATIONAL...
2018 Ford F-550 4x4 DurALift DTAXS39 39ft. Bucket Truck (A55973)
2018 Ford F-550...
UNUSED FUTURE SB45 HYD SILENT BREAKER (A52706)
UNUSED FUTURE SB45...
 
Top