painting yanmars

[Soundguy]

Calpyro.. very nice little tractor!

Chris

 

[pennwalk]

I used to work for a powder coating company. I would take parts from my boat trailers in and the guys on the line would coat them. Boy was that nice. I still have those trailers and the powder coated parts are still perfect. They coated some of the parts with nylon. You can hit that stuff with a hammer and not hurt it. Sure would be nice to have the whole tractor powder coated.

Chris

 

[roger_scotty]

A friend of mine has a couple of beakers of chemicals on the back of his work bench. After he sand blasts a rusty bolt he re-plates it. Doesn't seem to take but a minute...though I don't know anything about the process.

 

[ket]

powder coated yanmar.hmmm I like that Idea. I will have to check into that..I got a buddy who can get powdercoating done cheaply .. I 've never heard of coating with nylon but sounds good .. all will depend on cost

 

[pennwalk]

The nylon is not as pretty as the polyester and the company only had black on hand. Polyester comes in an amazing array of colors and even some mottled and textured coatings. The local powder coating shop does a lot of auto wheels but they are expensive. If you can get it done cheap look into it.

Chris