I am getting a set of Dearborn drag discs from a friend and they need some work. Bushings will need to be replaced as well as a few of the discs. Does anyone know a good place to order parts for old/antique/obsolete farm implements.
Parts for old implements
- Thread starter mboulais
- Start date
- Views: 947
PineRidge
Super Member
Bout a year ago we ordered a landside wheel for our 2-bottom Dearbourne plow from Redwood 707-586-1790. Good luck to you!
Glenn9643
Veteran Member
Some parts may be "brand" specific, but I've found bushings, blades, axles, etc. available at my MF dealer that work on my old disk. Main concern with mine was axle size. This may not apply to all; I may have just been lucky for once.
sweettractors
Advertiser
Most of the parts are pretty well generic, except the box bearing halves and the spools they ride around. You will probably have to get used. We may be able to help??? Call us when you get it tore down and can identify all the parts and demensions needed?--email sweet@scrtc.com --Ken Sweet
Soundguy
Old Timer
- Joined
- Mar 11, 2002
- Messages
- 51,575
- Location
- Central florida
- Tractor
- RK 55HC,ym1700, NH7610S, Ford 8N, 2N, NAA, 660, 850 x2, 541, 950, 941D, 951, 2000, 3000, 4000, 4600, 5000, 740, IH 'C' 'H', CUB, John Deere 'B', allis 'G', case VAC
</font><font color="blue" class="small">( but I've found bushings, blades, axles, etc. available at my MF dealer )</font>
Small world. I found axles, discs, and bearing halves ( grey iron ) for an old ford Disc that I have, at my local MF dealer as well.
Soundguy
Small world. I found axles, discs, and bearing halves ( grey iron ) for an old ford Disc that I have, at my local MF dealer as well.
Soundguy
