Parts Needed for Lienbach One Row Cultivator

Jim57 · Apr 20, 2006

I am looking for the replaceable plows tips on my Heavy Duty Lienback One Row Cultivator. Here is a link that has a picture of one like mine. I think I have a picture of mine on here but it isn't as good as the one on the following page. It's the second picture down on the right side.

One Row Cultivator with Extra Heavy Tines

If anyone has parts for the Lienbach Line please email me or call me.

bsm357@aol.com

Jim_Slagle · Apr 20, 2006

Jim, have you tried Leinbach themselves?

Leinbach
5000 Reynolda Road Winston-Salem N.C. 27106
9125 Hwy 67 East Bend N.C. 27018
(336) 924-4115

Jim57 · Apr 20, 2006

( Jim, have you tried Leinbach themselves?

Leinbach
5000 Reynolda Road Winston-Salem N.C. 27106
9125 Hwy 67 East Bend N.C. 27018
(336) 924-4115

)

I will give them a call tomorrow. I had found their website but unfortunately they were already closed.

Thank you for the information.

Jim

RobJ · Apr 21, 2006

What do you need? most tractor places stock the chisels and such, they are all standard. I;ve seen them at TSC to.

Jim57 · Apr 23, 2006

I was going to replace with as close as I can get to what I have... However, I have found that they make many different ones. I am not sure which would be the best with all the choices. I think I would like some that are universal. Changing them out would be alot of time. I also need the bolts. The two center shanks have worn down to the slot for the bottom bolt. I probably need to replace those as well. This unit was used so I didn't realize that they were worn until now.

I have priced the two shanks at $13.50 each x's 2 and the standard type of bolt on plows at $5.95 each x's 6. However this is with a trip to Winston, Salem, NC to pick them up.

That is about an 8 hour trip one way. I will check on shipping and also with other tractor places.

Jim

Inspector507 · Apr 24, 2006

Jim,
Have you checked with Agri-Supply ?
They have a few stores in NC and also mail order.

Jim57 · Apr 24, 2006

( Jim,
Have you checked with Agri-Supply ?
They have a few stores in NC and also mail order. )

I'll check there. Thank you for the link.

Jim

Jim57 · Apr 28, 2006

All sweeps replaced with New Ones today on my Lienbach One Row Cultivator. It works much better and I now know what the cultivator should do when it is new. I bought it used and it worked ok but now... It's a very hard working piece of equipment. Thanks for all of your help.

Jim