OP
RxRatedZ71
Gold Member
Some more progress pictures.
patio pergola
- Thread starter RxRatedZ71
- Start date
- Views: 4786
OP
RxRatedZ71
Gold Member
Got the 2x8's drilled and hung. It was much easier to drill all 6 at once and then use the same jig to drill the posts. This seemed to work in keeping everything in line and pretty much a straight-forward bolt up assembly in the air. I kept having problems with my saw-blade bending on the decorative cuts and leaving a angled cut rather than a square cut. I changed saws and began using my grandpa's older skil-saw jigsaw which has the older style blade support and that remedied the problem. I always knew I should hang onto his old power tools!
A bit later, I got most of the 2x6s up. I'm a bit skeptical on toe-nailing the cross-boards but I'm sure everything will be more secure when the final boards go up.
A bit later, I got most of the 2x6s up. I'm a bit skeptical on toe-nailing the cross-boards but I'm sure everything will be more secure when the final boards go up.
OP
RxRatedZ71
Gold Member
Well its 95% completed. I lack a few trim pieces at the base of each post and then the knee brace at the top. This project has been a pleasure to construct and relatively easy. I think staining was the most tedious portion. Its amazing how much shade it provides and how much it helps keep our house cool on these 104F summer days.
JohninCT
Platinum Member
RxRatedZ71 said:
It's a beauty! Now take a seat under it and sip a cold drink and enjoy your great work.
