Pat's Easy Change Pat's Easy Change System Question

   / Pat's Easy Change System Question #1  

bambam

New member
Joined
Apr 3, 2002
Messages
7
Pat\'s Easy Change System Question

I have been reading with interest about the Pat's Easy Change System in this forum. Looks very spiffy (beats moving 500 lbs of box blade to get the pins in those little holes...).

In the specs it says that the lift arm needs approximately 4" of straight arm. My Kubota L3000DT arms have about 3 1/2" of straight arm. Does anyone have experience with the Pat's system and the L3000DT, and, if so, does it fit or no?

Thanks;
Bambam
 
   / Pat's Easy Change System Question #2  
Re: Pat\'s Easy Change System Question

Might be better to go directly to the guy who makes them at PatrickG@bbtel.com with this question.
 
   / Pat's Easy Change System Question
  • Thread Starter
#3  
Re: Pat\'s Easy Change System Question

Just as a follow-up, I took the suggestion and contacted the manufacturer. Pat responded promply and says that the Easy Change system will fit the L3000DT.

Just in case anyone else was wondering....

Thanks;
bambam
 
   / Pat's Easy Change System Question #4  
Re: Pat\'s Easy Change System Question

</font><font color="blue" class="small">( Just in case anyone else was wondering.... )</font>
Now that's good TBNing. Thanks, John
 
   / Pat's Easy Change System Question #5  
Re: Pat\'s Easy Change System Question

Anyone with a Pat's quick change on a BX2200? Just wondering if it works for the rear bagger, since the adjustable arm is not used in that application. Thanks
 
 

Tractor & Equipment Auctions

CONTACT INFO LOT NUMBER 6 (A53084)
CONTACT INFO LOT...
2016 INTERNATIONAL LF687 (INOPERABLE) (A53843)
2016 INTERNATIONAL...
LINDE WELDER (A53843)
LINDE WELDER (A53843)
2012 CHEVROLET SILVERADO SINGLE CAB TRUCK (A51406)
2012 CHEVROLET...
2017 Ford F750 Buck Truck (A52377)
2017 Ford F750...
2001 JUSTIN 14 MOTORCYCLE TRAILER (A53843)
2001 JUSTIN 14...
 
Top