JohnBuffaloMN
Silver Member
Hello - I'm seeking information on hooking up a 42 SnowThro-200 to a John Deere 285 tractor. I found a 42 SnowThro-200 on CL that works with this machine, but I was shorted some mounting stuff. Recently purchased mounting hardware from CL (some of which seen in picture) that works with the 42" snow thrower... but it appears not my 42" snow thrower/tractor. I believe it is for the newer belt driven one.
I've found a lot of clues including needing John Deere parts:
(1) Kit - BM19216
(2) bolts 03m7190
(2) bolts 19M7866
(6) washers 24M7053
I have the lift assist and know how to mount that. I've got the frame onto the posts and the belt on the drive pulleys, but am missing the front mounts. Wondering what else I'm missing.
View attachment 569662
View attachment 569663
View attachment 569664
View attachment 569665
If you have a 285 (320 and 265 are the same series tractor) with the 42 Snowthro-200 mounted would you be so kind to take a couple pictures of the implement mounted showing the frame and brackets?
Any assistance appreciated!
juan
I've found a lot of clues including needing John Deere parts:
(1) Kit - BM19216
(2) bolts 03m7190
(2) bolts 19M7866
(6) washers 24M7053
I have the lift assist and know how to mount that. I've got the frame onto the posts and the belt on the drive pulleys, but am missing the front mounts. Wondering what else I'm missing.
View attachment 569662
View attachment 569663
View attachment 569664
View attachment 569665
If you have a 285 (320 and 265 are the same series tractor) with the 42 Snowthro-200 mounted would you be so kind to take a couple pictures of the implement mounted showing the frame and brackets?
Any assistance appreciated!
juan