Pic's of my TN 65
- Thread starter Robert_in_NY
- Start date
- Views: 3206
OP
Robert_in_NY
Super Member
- Joined
- Aug 1, 2001
- Messages
- 8,552
- Location
- Silver Creek, NY
- Tractor
- Case-IH Farmall 45A, Kubota M8540 Narrow, New Holland TN 65, Bobcat 331, Ford 1920, 1952 John Deere M, Allis Chalmers B, Bombardier Traxter XT, Massey Harris 81RC and a John Deere 3300 combine, Cub Cadet GT1554
Re: Pic\'s of my TN 65
That is a nice buck, where abouts are you located? We have a couple but you can not hunt them, they are too friendly.
<font color=blue>Robert Turk Jr.</font color=blue>
<font color=blue>Whitetail Splendor Deer Farms</font color=blue>
<font color=blue>Silver Creek, NY</font color=blue>
That is a nice buck, where abouts are you located? We have a couple but you can not hunt them, they are too friendly.
<font color=blue>Robert Turk Jr.</font color=blue>
<font color=blue>Whitetail Splendor Deer Farms</font color=blue>
<font color=blue>Silver Creek, NY</font color=blue>
Attachments
OP
Robert_in_NY
Super Member
- Joined
- Aug 1, 2001
- Messages
- 8,552
- Location
- Silver Creek, NY
- Tractor
- Case-IH Farmall 45A, Kubota M8540 Narrow, New Holland TN 65, Bobcat 331, Ford 1920, 1952 John Deere M, Allis Chalmers B, Bombardier Traxter XT, Massey Harris 81RC and a John Deere 3300 combine, Cub Cadet GT1554
Von
Veteran Member, Advertiser
Re: Pic\'s of my TN 65
Robert,
I'm in Fairport, NY. Which is just outside of Rochester. As for the deer being freindly, thats fine with me! just have that nice 10 point show up under my stand!
What do you raising them for if I might ask? Is there a market for them, or just the meat?
Robert,
I'm in Fairport, NY. Which is just outside of Rochester. As for the deer being freindly, thats fine with me! just have that nice 10 point show up under my stand!
What do you raising them for if I might ask? Is there a market for them, or just the meat?
OP
Robert_in_NY
Super Member
- Joined
- Aug 1, 2001
- Messages
- 8,552
- Location
- Silver Creek, NY
- Tractor
- Case-IH Farmall 45A, Kubota M8540 Narrow, New Holland TN 65, Bobcat 331, Ford 1920, 1952 John Deere M, Allis Chalmers B, Bombardier Traxter XT, Massey Harris 81RC and a John Deere 3300 combine, Cub Cadet GT1554
Re: Pic\'s of my TN 65
It is mostly a hobby but we sell most of them to other farmers. The 3 yr old is a 9pt and the other buck is a 4yr old is actually a 11 point. You can see in this pic he has a split brow.
<font color=blue>Robert Turk Jr.</font color=blue>
<font color=blue>Whitetail Splendor Deer Farms</font color=blue>
<font color=blue>Silver Creek, NY</font color=blue>
It is mostly a hobby but we sell most of them to other farmers. The 3 yr old is a 9pt and the other buck is a 4yr old is actually a 11 point. You can see in this pic he has a split brow.
<font color=blue>Robert Turk Jr.</font color=blue>
<font color=blue>Whitetail Splendor Deer Farms</font color=blue>
<font color=blue>Silver Creek, NY</font color=blue>
Attachments
Duckhunter
Bronze Member
AndyMA
Elite Member
- Joined
- Oct 11, 2000
- Messages
- 3,713
- Location
- Windham County, Conn
- Tractor
- Ford 2120 , Kubota MX5200 , Deere X748SE. 1956 Economy Tractor
Re: Pic\'s of my TN 65
On my 2120 I had to remove all of the 3pt hitch assembly to mount the hoe. The lower arm pins on the tractor housing also served as the rear mounting pins for the backhoe frame. The error allowed in mounting the backhoe at this point ws about 1/8" and it was a real pain. The backhoe was the Ford model current at the time for the 2120. I no longer have that hoe, as I said before I'm using the 2120 only for 3 point equipment. (By the way on reasonably level ground and with a 4' crow bar and a few blocks to pry from, I could usually mount the hoe in about 20 minutes- I just got sick of the number of times I had the hoe on and wanted to grade or york rake.
On my 2120 I had to remove all of the 3pt hitch assembly to mount the hoe. The lower arm pins on the tractor housing also served as the rear mounting pins for the backhoe frame. The error allowed in mounting the backhoe at this point ws about 1/8" and it was a real pain. The backhoe was the Ford model current at the time for the 2120. I no longer have that hoe, as I said before I'm using the 2120 only for 3 point equipment. (By the way on reasonably level ground and with a 4' crow bar and a few blocks to pry from, I could usually mount the hoe in about 20 minutes- I just got sick of the number of times I had the hoe on and wanted to grade or york rake.