Snow Equipment Owning/Operating Pictures of your snow weapons

[NS Gearhead]

Did you buy the machine complete with tracks or are they and after market install?

It's a kit sold by polaris that I bought with the bike. Mounting brackets on all 4 corners have to be installed first, then the tracks are bolted on the wheel hubs. Each corner has a limiting rod that keeps them from rotating too far. The front also have limiting cables for steering.

https://www.youtube.com/watch?v=y_3j2QjZPb0

 

[Slickheadhunter]

About three feet has fallen so far here in Weare NH, pretty good winter so far.

 

[Winmac]

Breaking trail last storm

 

[D7E]

finally got a good 12hour push tonight , Havent fired them up for over 6 weeks !

 

[skyhook]

finally got a good 12hour push tonight , Havent fired them up for over 6 weeks !

Nice, heres a question for ya.....
You get a call, the guy has 2 1/2 feet of snow in his 500 foot gravel drive,
you take one of your machines, which one do you take to do it.

 

[D7E]

Nice, heres a question for ya.....
You get a call, the guy has 2 1/2 feet of snow in his 500 foot gravel drive,
you take one of your machines, which one do you take to do it.

If i'm doing the job everthing gets done with the big loader

 

[skyhook]

lol...:thumbsup:

 

[Rustyiron]

That's some good looking iron there D7E!

 

[Green Acres Homestead]

Anybody have a fix for my hydraulic chute on my snow blower from sticking or freezing. I have a blizzard 6 foot snow blower with hydraulic shoot. It sticks sometimes when turning left. To free it I take a screw driver and pry at the base of the shoot until it has a little play in it. I think it is freezing. Anybody have a fix for this.

 

[Sawyer Rob]

Anybody have a fix for my hydraulic chute on my snow blower from sticking or freezing. I have a blizzard 6 foot snow blower with hydraulic shoot. It sticks sometimes when turning left. To free it I take a screw driver and pry at the base of the shoot until it has a little play in it. I think it is freezing. Anybody have a fix for this.

You are going to have to get it dried out first, then get some lube in there. IF it was mine, i'd spray Breakfree CLP on/in all the moving parts...

You can buy it at gunshops, also in Walmarts around here... It will keep the water out and lubes well, plus it will keep the rust away too...

SR