Pin storage.
- Thread starter parrt21
- Start date
- Views: 3288
Wagtail
Super Star Member
- Joined
- Jan 15, 2013
- Messages
- 12,913
- Location
- St Helens, Tasmania, Australia
- Tractor
- JD 4105 / JD Z355E (48" deck)
Interesting addition.
Personally, I have no need to carry such a variety of ready-use pins on my small property, but it sure looks 'handy'.
:thumbsup:
Personally, I have no need to carry such a variety of ready-use pins on my small property, but it sure looks 'handy'.
:thumbsup:
shovelmike
Platinum Member
- Joined
- Sep 8, 2019
- Messages
- 932
- Location
- Rural Missouri
- Tractor
- Ferguson TO35 , Mahindra eMax 22, Hustler Super Z
That's a pretty clever setup. My Ferguson has storage in left fender, Mahindra has a ROPS mounted toolbox. Those work for me.
groundcover
Elite Member
A manly pin cushion, good thinking!
chim
Elite Member
Small Harbor Freight tool bag behind the seat.
3Ts
Elite Member
Tool box mounted on fender. Contains pins, wrenches, gloves and paper towels.
Mendonsy
Veteran Member
I also use a toolbox for storage, but I can definitely see an advantage to making a smaller version of your idea as a place to temporarily store pins while changing attachments.
ruffdog
Super Star Member
- Joined
- Dec 31, 2011
- Messages
- 12,495
- Location
- cowville, banana republic
- Tractor
- Bobcat Toolcat 5610G, Deere X744, Cub Cadet IH 982
Do the pins rattle or klink around while the tractor is running?
PILOON
Super Star Member
LOL, I simply have a 'tool box' and rummage thru 'till I find what I need.
Mind U I Like the idea to retain pins when I change implements on a seasonal basis as most often I loose some.
Aren't magnets not just great?
Mind U I Like the idea to retain pins when I change implements on a seasonal basis as most often I loose some.
Aren't magnets not just great?
oosik
Epic Contributor
I keep a few extra snap rings in the OEM tool box behind the seat. The spare Cat 2 pins, sleeves, etc - all in one cardboard box in the tool shed. I have to return to the tool shed area to swap any 3-point implements anyhow.
However - that's a handy addition if you will need alternate parts out in the field.
However - that's a handy addition if you will need alternate parts out in the field.
joeyd
Veteran Member
I keep a set of pins on all of my 3 pt. attachments reducing what I have to carry around. That said the .30 cal ammo box mounted on the back of the tractor keeps a spare in case I loose something in the field. Once I did manage to loose a spring clip off of the skid shoe on my front snow plow while plowing. Glad I had the spare with me.
EddieWalker
Epic Contributor
Like others, my pins are in the toolbox attached to my tractor. I also have bolts for sheer pins, hose clamps, zip ties and a variety of tools to fix most things out in the field.
