Polaris trouble!!!

   / Polaris trouble!!! #1  

hillslider

Gold Member
Joined
Jun 5, 2003
Messages
387
Location
MN
Tractor
Kubota L3130 JD X750 and X350
Well my 5 year old Polaris 325 2x4 Magnum decided to spring an oil leak. Gave her the look over and see that the oil cooler or lines running to the cooler are dripping oil. I thought that getting to this area really looks like a PITA so I loaded her up and took it to a new dealer in the area. BIG mistake. The people were clueless and I waited a week and got nothing but the run around. So when I called them today and they still did not have it fixed I told them I would be there to pick it up. When I arrived they claimed that the parts came in and went ahead and fixed it. They replaced one of the lines and claimed the other came in wrong but said it looked good and was fixed. So I get home and wanted to take a ride. I backed out of the truck and went to grab the son and go for a ride when I started to smell burning rubber. I shut her down and saw that the line they replaced was up against the exhaust just melting away. The line is not the one for my machine. The fittings are 90's rather than straights and there is no way for the line to stay away from the exhaust. If I would have gone for that ride that line could have melted and gave the ehaust a good bath of oil. So I am stuck. The 4 dollar employee that did the work should be smacked. I hate being stuck in this spot. Time to call the owner and see if he is as dumb as his employees. /forums/images/graemlins/frown.gif
 
   / Polaris trouble!!! #2  
What a bummer!! /forums/images/graemlins/frown.gif

Nothing like paying good money for bad service /forums/images/graemlins/mad.gif
I try to do most everything myself, Cheaper and it gets done to my satisfaction or I only have me to blame /forums/images/graemlins/grin.gif
 
   / Polaris trouble!!! #3  
our 2000 magnum 4x4 325 had a recall on these lines when it was new.im sure yours did too. worth checking might save you a bundle.was bored and never check this forum.send me a p.m. if any questions.
escavader
 
   / Polaris trouble!!!
  • Thread Starter
#4  
I had the lines replaced on the recall shortly after I bought the ATV. The biggest problem was that the lines are pretty hard to look up and get the correct ones. I went to the Polaris website and you can look up parts online. Their are a lot of options with those lines. So i picked up the phone and spoke to a tech person who helped me find the correct part number. I then ordered the lines and put them on myself. Problem solved and have been riding ever since. As far as the dealer goes.....They lost a customer.
 

Tractor & Equipment Auctions

197637 (A50459)
197637 (A50459)
BUSH WACKER ST-180 ELITE BATWING ROTARY MOWER (A51406)
BUSH WACKER ST-180...
2011 DODGE RAM 2500 (A50854)
2011 DODGE RAM...
2007 HYDRO-AX 764 MULCHING MACHINE (A51242)
2007 HYDRO-AX 764...
2008 Ford F-250 Pickup Truck (A50323)
2008 Ford F-250...
2009 MACK CXU613 DAYCAB (A50854)
2009 MACK CXU613...
 
Top