Popup Camper Conversion To Toyhauler

   / Popup Camper Conversion To Toyhauler #1  

jejeosborne

Veteran Member
Joined
Oct 18, 2005
Messages
1,670
Location
Southern Indiana
Tractor
Kubota/B7800
I have been planning on doing this for quite awhile and finally found time to start and almost finish this week. I still have to swap my 3500 lb axle and tires out to 5200 lb axles. Here is the before to current progress photos.
 

Attachments

  • image-752927766.jpg
    image-752927766.jpg
    492.9 KB · Views: 2,312
  • image-1923110851.jpg
    image-1923110851.jpg
    542.9 KB · Views: 925
  • image-2317518698.jpg
    image-2317518698.jpg
    428.8 KB · Views: 1,279
  • image-1778598315.jpg
    image-1778598315.jpg
    591 KB · Views: 1,108
  • image-4240019369.jpg
    image-4240019369.jpg
    491.3 KB · Views: 1,287
  • image-1457796024.jpg
    image-1457796024.jpg
    498.2 KB · Views: 2,573
  • image-2256003100.jpg
    image-2256003100.jpg
    670.7 KB · Views: 1,996
  • image-1249555990.jpg
    image-1249555990.jpg
    638.6 KB · Views: 4,052
  • image-4251220869.jpg
    image-4251220869.jpg
    478.3 KB · Views: 3,001
   / Popup Camper Conversion To Toyhauler #2  
Nice job, been thinking about doing something like that myself.
 
   / Popup Camper Conversion To Toyhauler #3  
Great job on a very cool project. I've got a popup camper and I'd love to do that to mine as well but I'm probably going to sell it though. My wife had a bad experience on our last trip and I can't get her in it anymore. Keep us posted on the progress! I want to see the finished version!

Mike
 
   / Popup Camper Conversion To Toyhauler
  • Thread Starter
#4  
Here are some pics of it painted. Even one with it attached to my tractor to keep it tractor friendly.
 

Attachments

  • image-314695868.jpg
    image-314695868.jpg
    750.8 KB · Views: 1,209
  • image-2122312291.jpg
    image-2122312291.jpg
    715.6 KB · Views: 1,851
  • image-972301561.jpg
    image-972301561.jpg
    678.6 KB · Views: 3,440
   / Popup Camper Conversion To Toyhauler
  • Thread Starter
#6  
The results are in!
Not as bad as I had expected in some respect. I weighed it with only two motorcycles instead of three because I didn't want to push my luck not knowing what I had. I do not have the battery installed but I will be putting it on the back bumper. Also I will only be running with one propane tank when I have a motorcycle on because of the footpeg clearance needed. I included a screen shot of my weights as compared to stock values. When I weighed the stock trailer, it included a full tank of water and 3 bicycles hanging off the back bumper so it isn't exactly apples to apples because I had neither of those today.

Results:
Total 4260 lbs
Tongue 980 lbs
Axle 3280 lbs

I took my jacks and jacked from the first spring perch simulating moving the axle forward exactly one foot. This made the tongue weight 760 lbs. Don't know if I am going to move it yet.

Picks for your pleasure:


Jeff
 

Attachments

  • image-1140370837.jpg
    image-1140370837.jpg
    676 KB · Views: 913
  • image-4045243143.jpg
    image-4045243143.jpg
    680 KB · Views: 4,108
  • image-300842446.jpg
    image-300842446.jpg
    572.1 KB · Views: 9,285
  • image-2381514986.jpg
    image-2381514986.jpg
    426.8 KB · Views: 714
  • image-1013221525.jpg
    image-1013221525.jpg
    200.4 KB · Views: 653
  • image-1697362188.jpg
    image-1697362188.jpg
    557.4 KB · Views: 5,671
   / Popup Camper Conversion To Toyhauler #7  
Have you tried towing it loaded yet?
 
   / Popup Camper Conversion To Toyhauler #8  
Yes, your tongue weight is twice what it should be...I think the axle move is in order.........

Oh, and you could re-route the propane lines to the rear and build a cage for them there.
 
   / Popup Camper Conversion To Toyhauler
  • Thread Starter
#9  
caver said:
Have you tried towing it loaded yet?

I towed it to the scales about 5 miles each way. Did fine. Took it slow until I upgrade my tires.
 
   / Popup Camper Conversion To Toyhauler
  • Thread Starter
#10  
MotorSeven said:
Yes, your tongue weight is twice what it should be...I think the axle move is in order.........

Oh, and you could re-route the propane lines to the rear and build a cage for them there.

My tongue weight is 16% of total without the 550 lbs of motorcycles on it. Without the cycles the total is 3710 and the tongue is 580. I agree I am going to try to move the axle forward as much as possible. I would like to see about 150-200 lbs less on the tongue.
 

Tractor & Equipment Auctions

377253 (A44391)
377253 (A44391)
2011 PETERBILT 365 (A45046)
2011 PETERBILT 365...
2017 FORD F-250 (A45046)
2017 FORD F-250...
2018 Ford Transit 350 (A44501)
2018 Ford Transit...
2022 FORD F-350 (A45046)
2022 FORD F-350...
2009 Chevrolet Silverado 2500 HD 4x4 Ext. Cab Service Truck (A45336)
2009 Chevrolet...
 
Top