Post your Branson at work. Picture thread

[YanmarFever]

I bought a new grapple just mounted it on today

Then I got carried away and mounted it on the Toyota!!

 

[ning]

I bought a new grapple just mounted it on today

View attachment 853700
View attachment 853701



Then I got carried away and mounted it on the Toyota!!


View attachment 853704

Diggin' those replaceable teeth!
Looks really heavy duty. Who makes it?

 

[YanmarFever]

Bought it from Stephens Equipment in PA.

Name brand ???? the tags fell off ....

 

[ning]

I was digging in an area that will someday be a small pond / water feature near the uphill garden when I heard a very loud squeak and I realized I hadn't checked my right front tire which is somewhat prone to air loss in a while, and sure enough the squeak was the tire dumping what air was left in it as it pushed by a large rock with a full bucket.

While it was filling, I looked around the tractor and noticed I'm missing a bolt on the backhoe - another spot I knew from the past that it should be checked occasionally as I saw the bolt there loose once... bleah

 

[ning]

I found a file I had downloaded before, called "ANSUNG PART BOOK (ALL MODELS).pdf"

Looks like I need 5, 6, & 7.

 

[ning]

I picked up a grade 8, ¾"x2½" bolt/split washer/nut at my local hardware store.

Do you think the ~5% size difference between M20 (~20mm) and ¾" (~19.05mm) is ok or should I replace with a proper M20?

 

[K5lwq]

I would use 3/4 if I could not find a M20 and not worry about it.

 

[YanmarFever]

Getting to the root of the problem...

 

[CloverKnollFarms]

Yesterday I went to the mailbox. It's mainly used for tilling a couple acres... Too wet for that.

 

[tacticalturnip]

I miss Branson existing as an independent brand...