power steering install./fel interference

   / power steering install./fel interference #1  

varmint

Elite Member
Joined
Mar 17, 2003
Messages
2,571
Location
Northern Maryland
Tractor
Kubota B8200, then a Kubota L3130 HST, now a Kubota L3400 HST
I am curious if anybody out there has run into the problem I have: in trying to install a Kubota power steering kit on a B8200, I am finding I have to trim almost 80% of the steel off my left side Brush Hog fel mounting bracket for clearance of the cylinder/hoses and servo. I am going to fabricate a steel support tube to connect the brackets under the tractor, but I don't like the idea of re-engineering something in the field. Has anyone else dealt with this problem? Thanks
 

Tractor & Equipment Auctions

UNUSED Heavy-Duty D-Ring Shackle Set (A50860)
UNUSED Heavy-Duty...
2018 John Deere 325G Track Loader (A50490)
2018 John Deere...
Case 1150G Crawler Tractor Dozer (A50322)
Case 1150G Crawler...
2015 Top Hat T/A 20 ft. Gooseneck Trailer (A50860)
2015 Top Hat T/A...
NEW 2024 LOAD TRAIL 83IN X 20FT Tandem Axle Equipment Trailer (A50397)
NEW 2024 LOAD...
2022 Case IH Steiger 420HD AFS Connect RowTrac 4WD Tractor (A50657)
2022 Case IH...
 
Top