wdchyd
Elite Member
More pix
Power Steering Issue Terramite T5C
- Thread starter Terramite Connecticut
- Start date
- Views: 42222
-
- Tags
- terramite t5c
wdchyd
Elite Member
Another thing to consider when obtaining parts
this housing has the same casting numbers but has been machined differently for a different rotation......good reason to have the exact proper model code when ordering parts
this housing has the same casting numbers but has been machined differently for a different rotation......good reason to have the exact proper model code when ordering parts
cstamm81
Gold Member
- Joined
- Aug 10, 2009
- Messages
- 360
- Location
- Leesport, PA
- Tractor
- Kubota L5740, Mahindra 3016HST, Kubota F2880
I did check the pressure with no steering wheel input, and got 40 psi right off of the adapter plate. While turning the steering wheel I got 20 psi. Based on everything I am reading and hearing this plate is supposedly the culprit. It seems odd that there are quite a few people chiming on that the have this issue, must be a design flaw.
My decision becomes with a machine with 2500 hrs and an obvious hard lived life, do I tear into everything (trans, gear pump) while I am at it...
My decision becomes with a machine with 2500 hrs and an obvious hard lived life, do I tear into everything (trans, gear pump) while I am at it...
patp744
Bronze Member
is buying this plate from TM still the best way to go ?
