prepping for spring work

   / prepping for spring work
  • Thread Starter
#11  
M&W kits were real common. I'd think any turbo rebuilder could get him a donut. Not sure if the one from a 7000 will work.

Soundguy
 
   / prepping for spring work #12  
Soundguy said:
M&W kits were real common. I'd think any turbo rebuilder could get him a donut. Not sure if the one from a 7000 will work.

Soundguy

It is not a doughnut looks like 2 little top piston rings. seals between the outlet of the turbo and the exh elbow.

Been wondering if a briggs piston ring would work :)

Ben
 
   / prepping for spring work
  • Thread Starter
#13  
Oh, like a crushable compression washer?

Soundguy
 
   / prepping for spring work #14  
Like 2 piston rings with fiber on the flats in between them. Yes sort of like a super duty compression gasket/washer. They look just like Briggs compression rings with something in between them.
Actually I think rope type heat proof caulking rope would work if there is such a thing. It is a low pressure application with only the backpressure of an open stack on them. I think they just allow for mismatched expansion of the trubo outlet and the elbow that points the stack vertical.
Ben

Btw going tomorrow to get my oil and filters for spring prep.
 
   / prepping for spring work
  • Thread Starter
#15  
Rope type stove gasket is available at most good old fashioneed mom-n-pop hardware stores..

Soundguy
 
   / prepping for spring work #16  
Thanks soundguy, that might just work, if not it will just blow up the stack.
Ben
 

Tractor & Equipment Auctions

Bush Hog 180in Triple Deck Pull-Behind Bat Wing Commercial Mower Attachment (A49346)
Bush Hog 180in...
2020 John Deere 870GP Articulated Motor Grader (A49461)
2020 John Deere...
TRUCKING INFO (A50774)
TRUCKING INFO (A50774)
2018 JLG 4045R 40FT. Scissor Lift (A49346)
2018 JLG 4045R...
2015 MACK GU 713 (A50854)
2015 MACK GU 713...
UNKNOWN UTILITY TRAILER (A50854)
UNKNOWN UTILITY...
 
Top