prepping for spring work

   / prepping for spring work
  • Thread Starter
#11  
M&W kits were real common. I'd think any turbo rebuilder could get him a donut. Not sure if the one from a 7000 will work.

Soundguy
 
   / prepping for spring work #12  
Soundguy said:
M&W kits were real common. I'd think any turbo rebuilder could get him a donut. Not sure if the one from a 7000 will work.

Soundguy

It is not a doughnut looks like 2 little top piston rings. seals between the outlet of the turbo and the exh elbow.

Been wondering if a briggs piston ring would work :)

Ben
 
   / prepping for spring work
  • Thread Starter
#13  
Oh, like a crushable compression washer?

Soundguy
 
   / prepping for spring work #14  
Like 2 piston rings with fiber on the flats in between them. Yes sort of like a super duty compression gasket/washer. They look just like Briggs compression rings with something in between them.
Actually I think rope type heat proof caulking rope would work if there is such a thing. It is a low pressure application with only the backpressure of an open stack on them. I think they just allow for mismatched expansion of the trubo outlet and the elbow that points the stack vertical.
Ben

Btw going tomorrow to get my oil and filters for spring prep.
 
   / prepping for spring work
  • Thread Starter
#15  
Rope type stove gasket is available at most good old fashioneed mom-n-pop hardware stores..

Soundguy
 
   / prepping for spring work #16  
Thanks soundguy, that might just work, if not it will just blow up the stack.
Ben
 

Tractor & Equipment Auctions

2025 Swict 72in Bucket Skid Steer Attachment (A49346)
2025 Swict 72in...
2025 REDEDLIFT CPD25-XD4 FORKLIFT (A50505)
2025 REDEDLIFT...
iDrive TDS-2010H ProJack M2 Electric Trailer Dolly (A49346)
iDrive TDS-2010H...
2016 Chevrolet Tahoe LS SUV (A48082)
2016 Chevrolet...
2013 Ford E-250 Super Duty Cargo Van (A48081)
2013 Ford E-250...
1986 ASPT 30ft S/A Pole Trailer (A49346)
1986 ASPT 30ft S/A...
 
Top