SylvainG
Platinum Member
So yesterday after using the box grader for several hours, I've reattached the backhoe to the tractor. I was first unable to connect the hydraulic lines for two reasons. First one was fluid in the backhoe warmed up from morning to afternoon. Had to drop one of the stabilizer to remove the pressure. Second, and is the one that I question with, was the pressure in the tank prevented me from connecting the return line. Had to slowly open up the tank's fill cap to release the pressure. Is this normal? When the backhoe was off the tractor, my remote valve (that supply the backhoe when in its 'release' position - it's a log splitter valve) was centered so hydraulic fluid was automatically returning to tank.
Thanks
Thanks