price on new\old stock MX5
- Thread starter jmt1271
- Start date
- Views: 1531
jeffinsgf
Veteran Member
That is what I paid about a year ago for one that had been hooked up a couple of times before the owner decided it was too big for his tractor and he traded down to an LX-4.
Get him to throw in the front chain guard, and you'll have a good deal.
Get him to throw in the front chain guard, and you'll have a good deal.
rmonio
Platinum Member
Sounds like a darn good deal considering I just paid $2300 for an assembled MX6 with chain guards...
Any idea how much the designs have changed since early 2000?
-Bob
Any idea how much the designs have changed since early 2000?
-Bob
jeepinator
Gold Member
- Joined
- Nov 7, 2005
- Messages
- 263
- Tractor
- JD 3520, JD X739
I paid $1725 for a new MX5 without chain guards in Dec '05.
I later added front and rear guards for 300 something.
Seems like $1300 is a good deal!
I later added front and rear guards for 300 something.
Seems like $1300 is a good deal!
andrewj
Platinum Member
jmt1271 said:
after my lx6 developed some problems, I went shopping again and noticed the "bush hog" brand and an off brand they make is much stronger, and is made with box steel frame. I won't buy a JD brand cutter again. Sorry for the negative attitude about this, just telling it like it is.
jeepinator
Gold Member
- Joined
- Nov 7, 2005
- Messages
- 263
- Tractor
- JD 3520, JD X739
The "L" in LX stands for Light. As in light duty.
The MX is medium duty.
The MX is medium duty.
rmonio
Platinum Member
I'd go with the MX5... Given the work I've already put my MX6 through, I can't see using anything else.
That and the LX uses a shear-bolt vs. slip-clutch in the MX. I don't think you'll be unhappy with the purchase at that price.
-Bob
That and the LX uses a shear-bolt vs. slip-clutch in the MX. I don't think you'll be unhappy with the purchase at that price.
-Bob
NoMo
Gold Member
Clutch is optional on the LX4 & 5. Standard on the LX6.
Does that $1300 price include trading your LX5?
Does that $1300 price include trading your LX5?
rmonio
Platinum Member
NoMo is right on the slip clutch being optional on the LX series. It's standard on the MX's.... The MX's are truly the heavy-duty variety of these cutters and I can't see buying anything but the MX for brush cutting work.
-Bob
-Bob
