I just finished restoring a Ford 850 with a Wagner loader. It has a Cross 3 spool control valve. Everything works, but when not using any hydraulics, the hose to the control valve vibrates like crazy. I am told that it is building pressure and that something is either clogged or it is not by-passing effectively. The same hose also seems to get warm very fast. Any ideas on where to start looking?
Problem on cross valve body
- Thread starter tbutcher
- Start date
- Views: 1542
RickB
Super Star Member
- Joined
- Sep 18, 2000
- Messages
- 15,190
- Location
- Up the road from Dollar General WNC
- Tractor
- Just a Scag
Look for a plugged suction filter.
J_J
Super Star Member
- Joined
- Sep 6, 2003
- Messages
- 18,973
- Location
- JACKSONVILLE, FL
- Tractor
- Power-Trac 1445, KUBOTA B-9200HST
Well, just put a hyd gage in the system. You should have very little pressure, if any, with all valves in neutral.
Problem solved. Someone had replaced the original pump with one that is at least twice the size as it should be. Although I could not tell for sure, the oversize unit may have been producing 30 to 40 gpm. The local New Holland dealer had a new one for under $300.00 and the loader works perfectly.
