Problems hooking up an implement to a 3 pt. hitch?

[RedRiver]

I have a customer who has an old Ford 2000 with the stiff stabilizer arms and I'm trying to help him with a box blade we sold him. He is having trouble hooking up the box blade to his 3 pt. hitch and the whole problem is the way the aftermarket stabilizer arms are on the tractor, they don't allow the lift arms to come our far enough to hook up to the lift pins on the box blade.

Does anyone have any suggestions? I've looked around for some other stabilizer arms on the web with not much luck aside from finding the same style stabilizer arms he already has on the tractor.

I did not sell him the tractor but I'm just trying to help him.

thanks!

 

[JerryG]

This type will interchange with the type that your customer has if you can find the right length. If you can't find the right length, get on too long and cut a section out of it and reweld. GENERAL - UNIVERSAL STABILISERS

 

[RedRiver]

Thanks for the response Jerry! I did a little poking around and I saw those also but now I see they go up to 35" compared to the 31" all the stiff stabilizer arms are which makes a huge difference.

by the way, beautiful part of AR you live in up there! My father lives in Rogers, AR.

 

[JerryG]

Thanks for the response Jerry! I did a little poking around and I saw those also but now I see they go up to 35" compared to the 31" all the stiff stabilizer arms are which makes a huge difference.

by the way, beautiful part of AR you live in up there! My father lives in Rogers, AR.

They have several inches to their adjustment range. I never liked the flat bar stabilizers. The implements always had to be almost exactly the correct width and as we all know, Cat. 1 implement spec. are all over the board.

I lived in Rogers for a few years before I started farming. The Rogers/Bentonville area is Walmart central.

 

[JoeL4330]

Ithe whole problem is the way the aftermarket stabilizer arms are on the tractor, they don't allow the lift arms to come our far enough to hook up to the lift pins on the box blade.thanks!

Reverse the pins on the box blade?

 

[RedRiver]

If you reversed the pins they'd be even closer together. Basically the closer the lift pins are the longer the stabilizer bar has to be.

 

[weldingisfun]

I have a customer who has an old Ford 2000 with the stiff stabilizer arms and I'm trying to help him with a box blade we sold him. He is having trouble hooking up the box blade to his 3 pt. hitch and the whole problem is the way the aftermarket stabilizer arms are on the tractor, they don't allow the lift arms to come our far enough to hook up to the lift pins on the box blade.

Does anyone have any suggestions? I've looked around for some other stabilizer arms on the web with not much luck aside from finding the same style stabilizer arms he already has on the tractor.

I did not sell him the tractor but I'm just trying to help him.

thanks!

RedRiver,
I own an old Ford 2000 and have no problem hooking up to the box blade, but don't use stiff stabilizer bars. Instead, I use stabilizer chains from TSC.
Is it possible to get a picture of his setup?

 

[RedRiver]

I have not seen a picture but if you look under the NH owning/operating forum you'll see another thread I started about this. THe last picture Soundguy posted I assume is how this customers stabilizer arms are setup. His stabilizer arms mount under the axle and the other end hooks over the same lift pins where you lift arms hook up.

 

[weldingisfun]

Tell your customer to look at the stabilizer chains. TSC really likes them since they charge so much for them. Maybe you can get him a set for less.
I mounted them under the axle. Will take some pictures of my setup and post them when I get home tonight .

 

[RedRiver]

I just looked around on the TSC website but can't seem to find them on their. Anyone have a link?

thanks for all your help!