Processing maple tree

   / Processing maple tree #11  
Back in April of 2017 I took a maple tree from a friend. It fell on his house, and I helped him remove it. We tried to cut it in 16-18" thick rounds. Some of the rounds were well over 36" diameter, as I couldn't cut through them with my 18" saw and I had to quarter them.

This piece was 31" in diameter. I rolled it up onto the splitter by hand and halved it. Then quartered it. Then split the quarters, etc...

I ended up with 58 pieces of firewood from that 1 round.

View attachment 676266 View attachment 676264 View attachment 676265

About 10 years before that, I took a couple maples that fell in another friend's house. I think they were around 42" diameter and I got something like 102 pieces from that one round.

Anyhow, they were soft maples. They burned really fast and only lasted about 4 hours in my wood stove VS 10-11 hours when I use locust. But they were nice on days where I just wanted to take the chill off the house.

I used to enjoy tackling stuff like that. These days, if it's over 24" diameter, and it's not good enough for a saw log, it likely stays in the woods to rot. Just more trouble than it's worth to split up, even with the hydraulic lift on my splitter.
 
   / Processing maple tree #12  
I'm much happier with 12" and under locust. I have plenty of those.
 
   / Processing maple tree #13  
Must be extremely satisfying to turn a log into boards.

DSC00254.JPG

This is the best I can do, and as far as making chips, just for chips sake, it's not worth the incrediblly hard work! Maybe I could make some particle board!
 
Last edited:
   / Processing maple tree #14  
Must be extremely satisfying to turn a log into boards.


....or into chips. I don't do a lot of chipping here, but I have asked one or 2 of the tree services around here to dump chippings for me to spread around. Last two 5 cy loads were western red cedar. The best of the best.
 
   / Processing maple tree #15  
I reserve any cedar (to be chipped) for special occassions.

Kills me to know that some people get chips for free.
 
   / Processing maple tree #16  
I reserve any cedar (to be chipped) for special occassions.

Kills me to know that some people get chips for free.

Cedar has other uses also; I thought some of you might be impressed with the talent of this young man and his Cedar Creations; I know I certainly am. I have see his cabinets and caskets and they are beautiful.

HOME
 
   / Processing maple tree #17  
Kills me to know that some people get chips for free.

As I always say: "free" is a dangerous word.

When it comes to chippings, if you see a tree service in the area, and offer them a place to dump chippings, then stopping them after the first load can be hard. You also need to be selective: no weeds, grasses, palms, etc.

Since I live in the coastal rainforest, there are always tree services in the area.
 

Tractor & Equipment Auctions

2025 JMR 36in Bucket Mini Skid Steer Attachment (A49346)
2025 JMR 36in...
(INOP) JOHN DEERE 310 BACKHOE (A50459)
(INOP) JOHN DEERE...
2025 AllMetal K1230 UNUSED (10) Wire Mesh Netting (A50860)
2025 AllMetal...
LMC 70 GALLON SPRAYER (A50459)
LMC 70 GALLON...
2016 Kobelco SK75SR-7 Excavator (A50490)
2016 Kobelco...
2019 Generac MLTS-1 2.4kW Towable LED Light Tower (A49461)
2019 Generac...
 
Top