PSI and GPM of 422 circuits

[SwampmanLA]

I could call Terry but I bet you guys know this. What are the pressures and GPM max values for the 422 PTO and quick attach circuits? You need to know those values if buying a non Power trac hyd motor for a custom attachment.

SwampmanLA

 

[J_J]

I could call Terry but I bet you guys know this. What are the pressures and GPM max values for the 422 PTO and quick attach circuits? You need to know those values if buying a non Power trac hyd motor for a custom attachment.

SwampmanLA

8 gpm's, 2500psi

 

[MossRoad]

8 gpm's, 2500psi

That's for the main PTO. The aux PTO that operates the quick attach/power angle cylinders on attachments and the steering and lift circuits is rated at slightly less GPM but still 2500 PSI.

 

[stray]

That's for the main PTO. The aux PTO that operates the quick attach/power angle cylinders on attachments and the steering and lift circuits is rated at slightly less GPM but still 2500 PSI.

Moss I believe Power Trac told me the aux ran about 3 GPM. I called about this when building the wood splitter.