CreativeGuy
Bronze Member
On a related note. The rubber switch cover on my 425’s Aux switch has ripped off. It doesn’t appear to be the same standard screw on type that they have at the local Napa store. Any ideas for a replacement?
PT425 PTO Switch Replacement - How to wire up replacement switch of different brand?
- Thread starter smartguyz
- Start date
- Views: 4607
ponytug
Super Member
Odd. Mine are/were standard rubber (EPDM)screw on toggle switch boots. I bought twenty or so from Amazon to replace my shredded PTO boot. IIRC, they came in 11mm, 12mm, and half inch. I believe that I used an 11mm, but I would measure your switch first, especially as the Napa ones didn't fit.
All the best,
Peter
All the best,
Peter
Last edited:
