BobRip
Elite Member
I talked to Scott today and he talked to Terry. The torque increase for the new PT425 wheel motors is 30%. Not bad.
PT425 Wheel Motor Torque Increase - 30%
- Thread starter BobRip
- Start date
- Views: 4224
pequeajim
Platinum Member
New as of when?
Did I get the new motors as of Last Friday?
Did I get the new motors as of Last Friday?
pequeajim
Platinum Member
I just got an answer to my question.
Scott gto back to me and said that the 425s with the new wheel motors have been out for almost a year so I am covered!! /forums/images/graemlins/grin.gif /forums/images/graemlins/grin.gif /forums/images/graemlins/grin.gif
Scott gto back to me and said that the 425s with the new wheel motors have been out for almost a year so I am covered!! /forums/images/graemlins/grin.gif /forums/images/graemlins/grin.gif /forums/images/graemlins/grin.gif
MossRoad
Super Moderator
- Joined
- Aug 31, 2001
- Messages
- 58,182
- Location
- South Bend, Indiana (near)
- Tractor
- Power Trac PT425 2001 Model Year
<font color="blue"> Scott gto back to me and said that the 425s with the new wheel motors have been out for almost a year so I am covered!! </font>
Call me Torqueless In Indiana! /forums/images/graemlins/tongue.gif
Call me Torqueless In Indiana! /forums/images/graemlins/tongue.gif
PowerTrom425
Silver Member
I think MossRoad that if a vote were taken, you would be far from torqueless!!
pequeajim
Platinum Member
</font><font color="blue" class="small">( I think MossRoad that if a vote were taken, you would be far from torqueless!! )</font>
Really... With all the stuff that he's been doing with his tractor. Just goes to show that lots of torque isn't everything... /forums/images/graemlins/wink.gif
Really... With all the stuff that he's been doing with his tractor. Just goes to show that lots of torque isn't everything... /forums/images/graemlins/wink.gif
shoppintractors
Veteran Member
- Joined
- Jul 31, 2003
- Messages
- 1,219
- Location
- Southeast, Michigan
- Tractor
- Shoppin', Formerly Ford 1220, 7106 FEL, 60
Maybe..... Torqued-less in Indiana /forums/images/graemlins/tongue.gif
Definately not... Torqueless in Indiana
Don /forums/images/graemlins/smirk.gif
Definately not... Torqueless in Indiana
Don /forums/images/graemlins/smirk.gif
OP
BobRip
Elite Member
I see that I should have asked more questions. For example:
1. Can you retrofit a 425?
2. What would it cost?
3. Can you retrofit a 422?
4. What would it cost?
5. Does the 422 gasoline engine have enough power to drive the bigger motors to full torque?
6. Who makes the motors and can we buy them directly from the manufacturer and at what cost?
7. Are the mounting plates the same for old and new motors?
8. Do we really need it, or are we just being greedy?
1. Can you retrofit a 425?
2. What would it cost?
3. Can you retrofit a 422?
4. What would it cost?
5. Does the 422 gasoline engine have enough power to drive the bigger motors to full torque?
6. Who makes the motors and can we buy them directly from the manufacturer and at what cost?
7. Are the mounting plates the same for old and new motors?
8. Do we really need it, or are we just being greedy?
OP
BobRip
Elite Member
I will let somebody else ask the above questions.
FOURTEEN
Veteran Member
- Joined
- Jan 17, 2004
- Messages
- 1,042
- Location
- Efland - Triangle of North Carolina.
- Tractor
- 2004 Power Trac PT-425
May be time to upgrade to a new PT-425!! There must be plenty of 'flatlanders' on TBN who would be perfectly happy with a Torqueless PT, and would be willing to pay a fair price for it!!
Put the new PT-425 on your Christmas list along with the 21" monitor!! Have you been a good boy this year!??!
Put the new PT-425 on your Christmas list along with the 21" monitor!! Have you been a good boy this year!??!