HK45
Gold Member
Im up in the air about getting a pto generator for my bobcat ct450. Can somebody tell me if its safe to run the pto and tractor for a few days at a tiem if need be? Also any suggestions on who makes go pto generator? Thanks
I have a 13000 watt pto generator and a Branson 3820i. The generator is designed for 540 rpm but I run mine at 1000 rpm at barely above an idle. Never had a problem, and keep in mind that most of us do not run the generator every minute the power is out. I run mine a couple of hours at a time to get things done and cook or whatever. Then I shut it down for a couple of hours. I don't need to run a generator all night long to keep my night light lit and my alarm clock running. I also have a woodstove to keep the house warm when the power goes out in winter. I believe tractors were designed to run for many hours at a time. Just keep checking the fluids and grease it often and you should be fine.
The generator is running at the same speed due to the pto spinning at 1000 rpm at a slower tractor engine speed. The generator has a gauge to set the engine/pto speed to the correct speed to get the correct output.You are kidding aren't you about running the generator below rated speed? The lower voltage output will eventually burn up any electric motor rated for a particulate voltage.