OP
jamesdecanter
New member
When I pull the shaft out, I have to give it a sharp jerk to get it free.
You are using an out of date browser. It may not display this or other websites correctly.
You should upgrade or use an alternative browser.
You should upgrade or use an alternative browser.
Pto install
- Thread starter jamesdecanter
- Start date
- Views: 3065
More options
Who Replied?
OP
jamesdecanter
New member
When removing the shaft, a sharp jerk is required to free it.
pmsmechanic
Elite Member
- Joined
- Dec 6, 2013
- Messages
- 4,376
- Location
- Southern Alberta, Canada
- Tractor
- 4410 and F-935 John Deere, MF 245
Ok so if I'm reading correctly how everything all goes together then part 10 engages part 3 which is bolted to part 2. Part 2 moves part 12 back and forth to engage the pto. If I'm correct then it looks like part 12 has two groves in it. Could part 2 be in the wrong grove? Could there be a burr or something on the splines of the pto shaft that slide into part 12?
Edited to add: I looked on eBay and there are several good deals on factory Ford service manuals. Several combinations of owners, parts and service manuals. If you are going to continue to do your own service a factory manual is highly recommended. I&T manuals are ok but they never go into the detail that a factory service manual does. Search "ford 801 manual". I tried to find a pdf of a manual but the prices for paper ones are very reasonable. Just a suggestion.
I just looked through eBay some more and the first pdf I came to for $28.95 has everything you need. Ford 6 1 8 1 Tractor SERVICE, PARTS Catalog, OWNERS Manual -6- Manuals 1953-1964 | eBay
Edited to add: I looked on eBay and there are several good deals on factory Ford service manuals. Several combinations of owners, parts and service manuals. If you are going to continue to do your own service a factory manual is highly recommended. I&T manuals are ok but they never go into the detail that a factory service manual does. Search "ford 801 manual". I tried to find a pdf of a manual but the prices for paper ones are very reasonable. Just a suggestion.
I just looked through eBay some more and the first pdf I came to for $28.95 has everything you need. Ford 6 1 8 1 Tractor SERVICE, PARTS Catalog, OWNERS Manual -6- Manuals 1953-1964 | eBay
coralhead
Silver Member
- Joined
- Nov 24, 2012
- Messages
- 198
- Location
- Floyds Knobs, IN
- Tractor
- kubota B7100hst Branson 4520r Massey Ferguson 135 diesel
deleted
OP
jamesdecanter
New member
After about a zillion attempts I put the pto In neutral, held the shifter and gently pecked the end of the shaft, it went in. Thanks for your help and heads up on a Manuel.
coralhead
Silver Member
- Joined
- Nov 24, 2012
- Messages
- 198
- Location
- Floyds Knobs, IN
- Tractor
- kubota B7100hst Branson 4520r Massey Ferguson 135 diesel
The spline was probably buggered up.
OP
jamesdecanter
New member
I was nervous about the hammer use but I took off the side plate, felt the inside splines and made sure the pto shaft was inserted propely.
pmsmechanic
Elite Member
- Joined
- Dec 6, 2013
- Messages
- 4,376
- Location
- Southern Alberta, Canada
- Tractor
- 4410 and F-935 John Deere, MF 245
I was nervous about the hammer use but I took off the side plate, felt the inside splines and made sure the pto shaft was inserted propely.
If the pto engages and disengages freely then the splines are ok. Glad you got it all assembled.
OP
jamesdecanter
New member
All works!!