lhobson
Member
Does anyone know where I can find an after market replacement PTO shaft cover for my John Deere LX5 rotary cutter ? John Deere factory parts are a tad on the high side.
PTO Shield Replacement
- Thread starter lhobson
- Start date
- Views: 2134
OP
lhobson
Member
Didn't even realize there was a PTOShafts.com. Thanks, I'll surf on over !
greg_g
Super Member
- Joined
- Dec 18, 2003
- Messages
- 6,126
- Location
- Western Kentucky
- Tractor
- JD3720 Cab, 300X loader with 4-in-1 bucket
When an incomplete profile doesn't even suggest where you live, it's hard to point to a specific storefront source. As such, any decent farm supply store carries PTO components, including shields. But they're generally of a generic length. Once purchased, you must cut to fit.
//greg//
//greg//
OP
lhobson
Member
I updated my profile. I had forgotten I never finished filling it out.
I bought a generic shield from Tractor Supply. I cut it to fit, using the salesperson's suggestion of cutting equal lengths from both pieces. I still had vibration problems. What irks me is the original JD shield only failed at the upper tube. Not knowing that pretty much every section of the shield could be purchased independently, I threw the whole thing away. So instead of just spending $26, I need to spend $136 for a new JD shield. If you live long enough, you may actually learn something.
I bought a generic shield from Tractor Supply. I cut it to fit, using the salesperson's suggestion of cutting equal lengths from both pieces. I still had vibration problems. What irks me is the original JD shield only failed at the upper tube. Not knowing that pretty much every section of the shield could be purchased independently, I threw the whole thing away. So instead of just spending $26, I need to spend $136 for a new JD shield. If you live long enough, you may actually learn something.