Pulling engines with a boom pole

   / Pulling engines with a boom pole #22  
On most other cars and trucks I would agree. But the "CJ" series front end comes off so easy. The CJ5 I used to have was a short fender '70. It had nine bolts holding it on, and a few wires. I could lift the front end off by myself. Mosey's will have a couple extra bolts for the battery tray, a few more wires, and is a little heavier, what with the long fender I-6 congiuration.

Removing the radiator is sufficient, but it is soooo much easier with the front end just set to the side.
 
 

Tractor & Equipment Auctions

2017 TROXEL 130 BBL STEEL VACUUM TRAILER (A53843)
2017 TROXEL 130...
Pull-Behind 74in Rotary Brush Cutter PTO Attachment (A51691)
Pull-Behind 74in...
2013 Ford Edge Limited AWD SUV (A51694)
2013 Ford Edge...
1996 International Water Truck with a Caterpillar Engine (A53473)
1996 International...
2010 Ford Edge SE SUV (A51694)
2010 Ford Edge SE...
2012 John Deere Gator HPX 4x4 Utility Cart (A51691)
2012 John Deere...
 
Top