Pushing John Deere 425

a.palmer jr. · Mar 25, 2010

I have a 425 John Deere tractor which I'm needing to move. The engine is being worked on right now so it isn't running. Is there any way to move this tractor?

pennwalk · Mar 25, 2010

There is a lever inside the right rear wheel against the frame that lifts up to disengage the transmission. Then you can push it.

Chris

joes_427_vette · Mar 25, 2010

One should check the owners manual once in a while. Alot of useful information including moving the tractor without starting the engine. I'm as guilty as the rest until there is a problem. Good luck.

98ramtough · Mar 25, 2010

joes_427_vette said:
One should check the owners manual once in a while. Alot of useful information including moving the tractor without starting the engine. I'm as guilty as the rest until there is a problem. Good luck.

How is this reply helpful in anyway? Maybe he doesn't have a manual for it.

WayneB · Mar 25, 2010

I agree, give the guy a little slack

beenthere · Mar 25, 2010

Yup, we can be here to help, and be happy doing it.

Baucom · Mar 26, 2010

JD has excellent resources on their website. If the OP doesn't have a manual he can find it on John Deere Home Page Redirect . The LT/GT owners & parts manuals are available under the "Residential Equipment" tab, then go to "Services & Support." Owners manuals are found at the top under "Technical Publications." This resource can be a lot of help if you've lost your manual or bought a used machine without an owners manual.

98ramtough said:
How is this reply helpful in anyway? Maybe he doesn't have a manual for it.

a.palmer jr. · Mar 27, 2010

joes_427_vette said:
One should check the owners manual once in a while. Alot of useful information including moving the tractor without starting the engine. I'm as guilty as the rest until there is a problem. Good luck.

I didn't get an owner's manual with the tractor. I bought it used, but thanks to those who did help. The little bar behind the right rear wheel was well hidden, but worked and I finally got to move the tractor to where I could clean the engine compartment while engine is out.
The reason I asked in the first place was because someone told me you couldn't move the 425 or you'd damage the trans. I thought as expensive as these things are they should have made a way to pull them. I'm glad I asked.