QQ.. New M6060 R4's. Height from Top of Muffler to Gnd...? Garage check.

countryguy1225 · Nov 6, 2018

The new M6060 is coming home soon. I just posted a pic up in the buying forum and realized the Muffler stack looks pretty dang tall. Anyone know if it's under 7'? Trying to figure out which barn bay and such today and seems I forgot to measure the top of the Muffler down. Just thought I'd ask.
TIA.

dstig1 · Nov 6, 2018

Well i don't know that model too directly, but the M's are LARGER than the L's and my previous and current Grand L both needed an 8' door to fit in. The previous one, you could drop the ROPS bar to fit in a lower door, but current one has a cab so 8' minimum...

countryguy1225 · Nov 7, 2018

Thanks. Yeah. We measured 6.2 with the rops down and top of folded rops to ground. No cab on it. Good point I should have noted.

countryguy1225 · Nov 20, 2018

7'3" from top of stack to floor on R4 tires. It fit w/ 1/4 to 1/2" to spare depending on jam or ceiling. WHOOT!!!

Sidenote: hauling home, I do not have a top-deck over wheel hauler, but the dovetail w/ wheel wells. that's 83.25" between the wheel wells. Spec lists this M6060 as 83.1 in the Ops guide. When on my trailer I had an inch on each side between the sides FWIW & YMMV

PS- I'll see if that top stack will slide down any... 3/4" would be perfect.

Greenfield Dave · Nov 22, 2018

Measure two or three times before driving in!! ROPS was SUPPOSED to clear the door, and it did, but it caught the frame of the door instead. :banghead: