Question about third function valve

   / Question about third function valve #31  
Thank you for the picture. That should work perfectly and is how the logical flow from device to device should be done. If you want the 3rd function permanently in the loop, you could remove the lower set of QDs replacing with a properly threaded coupler as I previously mentioned.

For even more elegance, one could have a custom hose made with a banjo fitting on one end to supply fluid from the loader PB port to the 3erd function and skip a couple of connections, but what you have works.

I think we are done here.
 
   / Question about third function valve #32  
Yup. If the T side of the grapple/3rd is what is supply the backhoe, and the backhoe returns back to the tank than it is plumbed correctly in terms of flow order
 
   / Question about third function valve
  • Thread Starter
#33  
Thanks for taking the time to make suggestions and explanations. I appreciate the time and effort you all have given.

Randy
 

Tractor & Equipment Auctions

3000 Gallon Divided Fuel Tank (A50774)
3000 Gallon...
Richie Water Master 1200 Trough (A50774)
Richie Water...
2025 84in Dual Cylinder Grapple Bucket Skid Steer Attachment (A51691)
2025 84in Dual...
2011 Ford F-150 4x4 Crew Cab Pickup Truck (A50323)
2011 Ford F-150...
Agri Metal Tuff Vac 5000 (A50774)
Agri Metal Tuff...
2013 Ford F-250 Ext. Cab Pickup Truck (A51692)
2013 Ford F-250...
 
Top