m5040
Platinum Member
- Joined
- Nov 23, 2008
- Messages
- 893
- Location
- CT
- Tractor
- Kubota M6040 L2250, JohnDeere 310D, Ford 841 Elenco, Ford 961, Trapmaster, PT180 w/LM bucket and 45" brush cutter, PT1430 Deutz w/grapple bucket, Antonio Carraro Tigrecar 6500. John Deere 5300. Former owned Steiner 430 max, Goldoni REV Maxter 7
A rainy day here in CT so doing the 8 hr interval greasing on my 1460 and checking the center pin torque (pic attached if you have never seen yours).
It has 24 hrs on it and it is the first time I noticed it has grease fittings on both sides of the lower center pin boss (and only on the right side of the upper pin).
Now logic tells me the grease fittings on both sides can't be for convenience, So it must need grease from both sides. Has anyone talked to PT on this?
Also out of all the loader grease fittings, two would be hard to grease, so I rotated those 180 deg, now they grease easily.
It has 24 hrs on it and it is the first time I noticed it has grease fittings on both sides of the lower center pin boss (and only on the right side of the upper pin).
Now logic tells me the grease fittings on both sides can't be for convenience, So it must need grease from both sides. Has anyone talked to PT on this?
Also out of all the loader grease fittings, two would be hard to grease, so I rotated those 180 deg, now they grease easily.